Resources
Shop-floor answers, written by machine builders.
Guides on custom machines, automation, retrofits, tooling, and controls. The same straight answers we give on scoping calls, written down.
EOAT Basics: How End of Arm Tooling Makes or Breaks a Robotic Cell
A practical guide to end of arm tooling and EOAT design: gripping strategies, sensing and verification, changeover, troubleshooting, and how to iterate tooling that actually works.
Fixture Design: Turning Operator Skill Into Repeatability
How custom jigs and fixtures replace guesswork with repeatable location. 3-2-1 principles, clamping strategy, poka-yoke error proofing, and gauge validation, explained simply.
Your PLC Is Obsolete. Here Is a Practical Migration Plan.
How PLCs become obsolete, why running on eBay spares is risky, how to inventory I/O and logic before you touch anything, and how to compare migration strategies without shocking your production schedule.
Retrofit vs Replace: What to Do With an Aging Machine
A practical framework for deciding between machine retrofit and replacement: how to audit mechanical vs controls condition, spot hidden costs on both sides, and plan a cutover that doesn't wreck your schedule.
What Actually Drives the Cost of a Custom Machine
The real cost drivers behind a custom machine build, how to write a spec that gets accurate quotes, and how to compare bids that don't match.
Where Automation Pays Off First on a Short-Staffed Floor
How to pick your first automation cell when you're short-staffed: a part-readiness audit, what to fix before you automate, and how to sequence the roadmap that follows.
Start here
Reading is free. So is the first call.
If one of these guides describes your floor, send us the specifics and we will give you a straight read on the fix.